Sony DSC-U60 User Guide

Page of 88
19
S
hoo
ting st
ill
 im
ages
                    
,
Close the inner cover and slide 
it in the direction of the arrow 
to lock it.
Make sure the cover is closed securely.
To remove a “Memory Stick”
Perform steps 1 and 2, and push the 
“Memory Stick” to pop it out. When doing 
so, be careful not to drop the “Memory 
Stick.”
• When the access lamp is lit up, it means 
that image data is being read or written. 
Never open the inner cover or turn off 
the power at this time, as the data may 
be damaged.
,
Inspect the waterproof cover.
Inspect the O-ring and the O-ring mating 
surface for scratches, deformation, dirt, hair 
or other problems.
Note that if the O-ring and the O-ring mating 
surface are damaged, dirty or have other 
problems, the waterproof performance may be 
impaired. In this case, water may enter the 
inside of the camera and cause irreparable 
damage.
Replace the O-ring with a new one if it 
becomes scratched or deformed, or after 
approximately two years of use even if there are 
no problems (page 81).
,
Close the waterproof cover.
Close the waterproof cover and slide the 
slide lock lever back into place until the 
OPEN button clicks.
When using the camera underwater or in places 
exposed to water, slide the lock switch (page 9) 
to lock the waterproof cover. This prevents the 
waterproof cover from opening by accident.
4
Access lamp
5
O-ring
O-ring mating 
surface
6