Vulcan gh30 Specification Guide

Page of 2
Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
08
72
A
10
09
OS
I
.o
C t
ra
H-
na
cl
uV
F-31510 (05/06)
 0
3
H
G :
L
E
D
O
M
 t
o
ni
F l
ai
da
R
g
na
sa
yt
u
yv
ae
p
oT
e
Model GH30C
Shown with 17" backguard
MODEL GH30
RADIAL FIN HOT TOP HEAVY DUTY GAS RANGE
GH30
Standard Oven
GH30C
Convection Oven
STANDARD FEATURES
Stainless steel body and 6" adjustable legs.
1
1
4
" diameter front gas manifold.
Radial fin hot top with ceramic fire brick provides graduated
heat  from  900°  center  ring  to  300°  outside  area.  Three
concentric cast ring burners with separate manual controls.
Inner ring 10,000 BTU/hr., middle ring 15,000 BTU/hr., outer
ring 20,000 BTU/hr. Pilot ignition.
Oven controls located in the cool zone.
Oven interior measures 26"w x 28"d x 14"h. Porcelain enamel
on steel hearth, door and side liners. One oven rack and two
rack  positions.  50,000  BTU/hr.  “Flame  Retention”  burner
with pilot ignition. Thermostat adjusts from 150° to 500°F.
One year limited parts and labor warranty.
OPTIONS
Snorkel
TM
  convection  oven  in  place  of  standard  oven.  Add
suffix  “C”  to  the  model  number.  Porcelain  enamel  on  steel
interior  measures  26
1
8
" w  x  22
3
32
" d  x  14
1
8
" h.  Three  oven
racks  and  five  rack  positions.  32,000  BTU/hr.  burner  with
pilot ignition. Thermostat adjusts from 200° to 500°F. 
1
4
 H.P.
blower  motor  with  7  foot  power  cord  and  plug.  120/60/1,
5 amps.
Stainless steel back finishing panel.
Common  front  top  ledge  up  to  68"  wide.  (Not  for  use  on
griddle tops, spreader plates and deep fat fryers.)
Cap and cover manifold end(s). (No charge.)
1
5
8
" stainless steel toe base - 31
5
8
" working height.
Set of four 5" diameter casters, two locking.
Stainless steel dolly frame with casters, up to 102" wide.
Cooling fan for Snorkel
TM
 convection oven motor. Required
when unit is installed with a back finishing panel or a toe base.
Rear gas connection. (Reference spec sheet F-31525.)
Second year extended limited parts and labor warranty.
SPECIFICATIONS
Heavy duty radial fin hot top gas range with oven, Vulcan-Hart
Model  No.  GH30.  Stainless Steel body  and 6" adjustable legs. 1  
diameter front gas manifold. Radial fin hot top with ceramic fire
brick provides graduated heat from 900° center to 300° outside
area. Three concentric cast ring burners with separate manual
controls. Inner ring 10,000 BTU/hr., middle ring 15,000 BTU/hr.,
outer ring 20,000 BTU/hr. Pilot ignition. Oven interior measures
26"w x 28"d x 14"h. Porcelain enamel on steel hearth, door and
side liners. One oven rack and two rack positions. 50,000 BTU/hr.
heavy  cast  "Flame  Retention"  burner  with  pilot  ignition.
Thermostat adjusts from 150° to 500°F. Controls located in the
cool zone.
Exterior  dimensions:  34"w  x  39
1
8
"d  x  36"  working  height  on
6" legs.
CSA design certified. NSF listed.
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
GH30S
Standard Base
650° Thermostat Statement.
Stainless steel center shelves on cabinet base units statement.
1
4
"
Cabinet storage base in place of standard oven. Add the 
suffix “S” to the model number.