GE d User Guide

There are several ways to connect your DVD Player to your TV depending upon the cables you
have and the jacks that are on the back of your TV. Different jacks and cables provide a different
level of performance.The jacks on the back of your DVD Player and the cables used to connect
them are explained below.

PROGRESSIVE
SCAN Y, PR, PB
ONLY

NORMAL

The basic Video jack (usually color-coded yellow) is also referred to as
composite video. Composite video is better than the video quality you get from
an RF coaxial cable (the type used to plug the cable feed into a TV). Usually the
video cable is bundled with the audio cables (white and red).

If you connect the DVD Player to a TV that is capable of progressive scanning
the signal, you need to use the Y, Pb, Pr jacks and video cables. It is essential
you turn the VIDEO SELECTION switch to the Progressive Scan only
position. If you use S-VIDEO OUT or VIDEO OUT jacks for your connection,
leave the switch in NORMAL position.

The S-VIDEO OUT (separate video) jack provides better picture quality than
composite video (the VIDEO OUT jack) because the color is kept separate
from the black and white part of the video signal. If your TV has an S-Video
jack, connect the DVD Player to the TV with an S-Video cable.

The Y, Pb, Pr jacks provide optimum picture quality because the video signal is
separated into three parts.

To ensure maximum picture quality, use three video-grade cables (yellow) for
the connection.You can also buy bundled component video cables that are
color-coded to match the Y, Pb, Pr jacks (red, green, and blue).