Bosch HBL8650 User Guide

Page of 56
English 44
Maintenance
Replacing an Oven Light
Use only 10 Watt, 12 Volt bi-pin halogen light bulbs. These bulbs can be purchased 
through retail stores. 
Use a clean, dry cloth to handle halogen light bulbs. This will increase the life of the 
bulb.
To replace the halogen bulb on the oven ceiling:
Stainless Steel Surfaces
Always wipe or rub in the direction of the grain. 
Clean with a soapy sponge, then rinse and dry, or 
wipe with Fantastik® or Formula 409® sprayed 
on a paper towel. Protect and polish with 
Stainless Steel Magic® and a soft cloth. Remove 
water spots with a cloth dampened with white 
vinegar. Use Bar Keeper's Friend® to remove 
heat discoloration.
Plastic & Controls
When cool, clean with soapy water, rinse and dry.
Probe
Wipe with soapy water. Do not submerge. Do not 
wash in the dishwasher.
Printed areas (words and 
numbers)
Do not use abrasive cleansers.
Part
Recommendations
m
CAUTION:
Make sure the appliance and lights are cool and power to the 
appliance has been turned off before replacing the light bulb(s). 
Failure to do so could result in electrical shock or burns.
The lenses must be in place when using the appliance.
The lenses serve to protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid 
breaking. Broken glass could cause an injury.
Light socket is live when door is open.
1. Turn off power to the oven at the main 
power supply (fuse or breaker box).
2. Remove the glass cover by 
unscrewing it.