Cambridge SoundWorks 5.1 User Guide

6

Finalizing Your Installation

•

Our surround

 speakers are

usually hung directly on a wall.
Simply screw the supplied
No. 10 screws into the wall so
that their heads protrude about

3

/

8

 inch, allowing them to fit

into the keyhole slots on the
back of each speaker.
The plastic anchors supplied
may be needed to secure the
screws in particularly hard or
soft material. If so, drill 

1

/

4

 inch

holes in the wall, and tap the
anchors into the holes until
they are flush with the wall.
Then screw the screws into the
anchors until they protrude

3

/

8

 inch from the wall.

•

Apply four stick-on feet to the
back corners of each speaker
(see diagram). These feet will
insure a secure, vibration-free
installation. Adjust the screw
of each anchor so that the
surround speaker can be hung
on it with just a small amount
of pressure.

•

If you need to mount one of
the Surround

 speakers on a

surface that is not vertical,
you can use our special swivel
mounts, available from your
store or directly from Cam-
bridge SoundWorks. For more
information, call a Cambridge
SoundWorks Audio/Video
Consultant at 1-877-YES-HIFI.

CAMBRIDGE SOUNDWORKS, INC.
NEWTON, MASSACHUSETTS USA 

1-800-367-4434 USA

617-332-5936 OUTSIDE THE USA

8 OHMS
MAGNETICALLY 
SHIELDED

PATENTS: 5,043,970; 5,189,703; 5,222,059; 5,109,416

MADE IN TAIWAN

™

™

00000