Hitachi dz-mv200a Owner's Manual
56
English
● Checking EIS On or Off
You can check EIS On or Off by the on-screen in-
formation display.
formation display.
After recording with EIS set to “Off”, it is recom-
mended that you return the setting to “On” and
then turn the DVD video camera/recorder off, un-
less you normally record with “Off” setting.
This function is effective only during movie record-
ing: It will not work during still recording.
mended that you return the setting to “On” and
then turn the DVD video camera/recorder off, un-
less you normally record with “Off” setting.
This function is effective only during movie record-
ing: It will not work during still recording.
Note:
The EIS setting will not change if the DVD
video camera/recorder is turned off.
Note: Although you can switch EIS between on
and off during still recording, the setting will be ef-
fective only during movie recording.
Note: It is recommended that you specify “EIS
Off” when using the DVD video camera/recorder
on a desk or tripod.
Note: When “EIS On” is specified, there will be a
slight difference between the actual movement
and the movement on screen.
Note: Gross camera shake may not be entirely
corrected even if “EIS On” is specified.
Note: EIS may not operate correctly when the
conversion lens (optional) is used.
Note: Although you can switch EIS between on
and off during still recording, the setting will be ef-
fective only during movie recording.
Note: It is recommended that you specify “EIS
Off” when using the DVD video camera/recorder
on a desk or tripod.
Note: When “EIS On” is specified, there will be a
slight difference between the actual movement
and the movement on screen.
Note: Gross camera shake may not be entirely
corrected even if “EIS On” is specified.
Note: EIS may not operate correctly when the
conversion lens (optional) is used.
1
Press the MENU button in the recording pause
status.
status.
The menu screen will appear.
2
Use the joystick to
choose “EIS” on the
“Camera Functions
Setup” screen, and then
press the
choose “EIS” on the
“Camera Functions
Setup” screen, and then
press the
button.
The options will appear
on the right of “EIS”.
on the right of “EIS”.
3
Use the joystick to
choose the desired op-
tion, and then press the
choose the desired op-
tion, and then press the
button: The se-
lected option will be set.
4
Press the MENU button.
The menu screen will disappear.
Using the Electronic Image Stabilizer (EIS)
This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you
use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
EIS