Hitachi VM-1800A Owner's Manual
EYEPIECE ADJUSTMENT
55
NOTES:
Do not touch the lamp directly with your fingers. It may shorten its service life.
When the lamp is replaced, or when the front case of the camera light is removed, make
When the lamp is replaced, or when the front case of the camera light is removed, make
sure the front case is attached to the camera light properly.
Consult your nearest service center to replace the lamp.
EYEPIECE
ADJUSTMENT
To use the electronic viewfinder without eyeglasses on, adjust the diopter control for
optimum focus adjustment.
optimum focus adjustment.
VIEWFINDER BRIGHT, COLOR AND TINT CONTROLS (For VM-2800A/3800A)
You can adjust the viewfinder brightness, color and tint as required.
"BRIGHT" Control
Viewfinder brightness can be adjusted by turning the "BRIGHT" control. This does not
affect the picture actually recorded by the camcorder.
Viewfinder brightness can be adjusted by turning the "BRIGHT" control. This does not
affect the picture actually recorded by the camcorder.
"COLOR" and "TINT" Controls
The small "COLOR" and "TINT" controls are set at the factory and should require no
adjustment. If they ever require adjustment, use a plastic screwdriver. Make the
adjustments with caution to prevent damaging the miniature controls.
The small "COLOR" and "TINT" controls are set at the factory and should require no
adjustment. If they ever require adjustment, use a plastic screwdriver. Make the
adjustments with caution to prevent damaging the miniature controls.