Hitachi ut32x812 User Guide

22

ENGLISH

Turn On the power of the unit.

1.  Press the Main Power switch on the unit.

  The Indicating Lamp illuminates in Green, and the 

Illumination Lamp turns Blue. 
The image will display on screen.

2.  Once the Main Power switch is on, you can turn On/Off by 

pressing the 

Power (On/Off) button on the remote control.

1.  Press the Power (On/Off) button on the remote control.

  The image disappears from the screen. The Indicating 

Lamp turns 

Red (Standby mode), and the Illumination 

Lamp turns off.

2.  Press the Main Power switch on the unit to completely turn 

Off the power to the unit.

 While the Indicating Lamp illuminates in Red (Standby mode), 

you can turn On/Off by pressing the 

Power (On/Off) button on 

the remote control.

–

Off

–

–

Standby mode

–

Blue

On

–

–

Power Save mode

Refer to 

 and 

 for the condition.

Blue

On

Receiving Remote Control signal

 

 If the image does not appear on the screen at all, or if there is any problem with it, see “TROUBLESHOOTING” on 

~

. This may help you to solve the problems.

 After turning On, it takes about 6 seconds until the monitor starts up. Please note that buttons on the remote control 

and the unit (such as the Power button) do not work during this period of time.

 If power is interrupted during use of the unit, to avoid sudden surges of electricity when the power comes back on, 

turn off the main power to the unit before leaving home.

Main Power Switch

 (on the underside) 

Front

Rear

Power On/Off button

Illumination Lamp

Indicating Lamp