Canon I455 Quick Setup Guide

Advanced Printing

(3) Select Style

Style

Style and specify the paper

paper

paper size, Borderless

Borderless

Borderless or Bordered

Bordered

Bordered printing, and

date printing On or Off.

(4) After specifying the style, specify a number of copies, select Print

Print and then

press the SET

SET

SET button.

Note

z For the digital camera operation and troubleshooting, refer to your

digital camera user's manual. For print error messages, refer to

"Cannot Print Properly from the Digital Camera

Cannot Print Properly from the Digital Camera

Cannot Print Properly from the Digital Camera"

on page 55.

z For the digital video camcorder operation, print error messages, and

troubleshooting, refer to your digital video camcorder user's
manual.

z By operating the digital camera, you can make the following prints:

- You can make a standard print from the image displayed in the

single display mode or in the index display mode.

- You can print specified numbers of images, or make an index print

using the DPOF function.
Images other than Exif may not be index printed.

- The images taken with an Exif 2.2 compatible digital camera will

be adjusted by using the Photo Optimizer PRO function.

- If date printing is set on the digital camera, the date of

photographing will be printed (excluding the index print).

- Images will be scaled automatically according to the size of the

media set on the digital camera.

z The digital camera does not support the following functions:

- Print quality setting
- Maintenance

*The print head cannot be aligned through the digital camera.
Connect the printer to the computer, then align the print head.
If the print head has not been aligned, reduce the printing speed (one-
way printing) for better print quality.

z To disconnect the cable connected between the digital camera and

printer, follow the procedure below:

1. Disconnect the cable from the printer.
2. Turn off the digital camera.
3. Disconnect the cable from the digital camera.

When disconnecting the cable, be sure to hold the connector by
its sides.