LXE 1280 Reference Guide
34
Password Access Levels
LDS Plus Reference Guide
E-SW-LDSPLUSRG-G
Password Access Levels
There are three (3) access levels associated with the configuration utility. The access levels are:
• Operator
(Access Level 1)
• System Administrator
(Access Level 2)
• LXE Technical staff
(Access Level 3)
Access to the configuration utility is gained by entering the appropriate password at the Enter
Password text box. The password determines the access level of the user. Passwords are masked
upon entry. When a password is entered on some computers (but not all), each character is
displayed as an “*”.
Password text box. The password determines the access level of the user. Passwords are masked
upon entry. When a password is entered on some computers (but not all), each character is
displayed as an “*”.
Passwords are modified by selecting the System option from the main menu. The Password menu
option is then chosen:
option is then chosen:
Only passwords for the current access level (or any lower access levels) can be modified. For
example, the System Administrator may change his/her password and that of the Operator, but the
Operator can only change his/her password.
example, the System Administrator may change his/her password and that of the Operator, but the
Operator can only change his/her password.
See the “Pre-Configured Passwords” section for password entry instruction. See the “Passwords”
option in the System menu for password edit instruction.
option in the System menu for password edit instruction.
Changed Radio Parameters
Radio parameters are edited directly using an ASCII text editor (please refer to the specific DOS
computer reference guide for instruction). When changes are made to radio parameters the DOS
computer must be rebooted before the changes take effect.
computer reference guide for instruction). When changes are made to radio parameters the DOS
computer must be rebooted before the changes take effect.