LXE 1280 Reference Guide
72
Protocol Menu Option
LDS Plus Reference Guide
E-SW-LDSPLUSRG-G
TCPIP Autologin Parameters
The TCPIP Autologin screen contains parameters pertaining to user login. For the VX4, up to
four autologin hosts may be specified, and will be referred to as Host A, Host B, Host C and Host
D. There are ten autologin parameters for each host. For all other computers, there are ten
autologin parameters for a single host.
four autologin hosts may be specified, and will be referred to as Host A, Host B, Host C and Host
D. There are ten autologin parameters for each host. For all other computers, there are ten
autologin parameters for a single host.
The TE Selection Menu allows the user to select the desired host for the Autologin process.
Please see Chapter 3, “Getting Started”, for more information. Multiple hosts can be specified for
the VX4.
Please see Chapter 3, “Getting Started”, for more information. Multiple hosts can be specified for
the VX4.
Autologin data is stored in the computer and edited using the CONFIG program.
Parameter Access Levels
Refer to the “System Passwords” section of this chapter for more information on access levels.
AutoLoginOn – Automatic Login Enable
Function
Set the AutoLoginOn parameter for Host to Enabled. Not available on VX4.
Options
Options:
Disabled,
Enabled
Default setting:
Enabled
LXE Required Setting:
Enabled
Access Level
Parameter may only be modified by a user with an access level of 2 or 3.
Host – Host Name
Function
Specifies the specific host that the autologin mechanism will attempt to connect to. Not available
on VX4.
on VX4.
Options
Valid options:
[user defined]
Default setting:
none
Access Level
Parameter may only be modified by a user with an access level of 2 or 3.