LXE hx3 Reference Guide
Assembly
19
E-EQ-HX3RG-C
HX3 Reference Guide
Slipping the HX3 into the Voice Case
Partially Open Front
Clear Window
Figure 1-20 HX3 Voice Cases
Figure 1-21 HX3 Voice Case Battery Cable Routing
1. Slide the belt through the belt loop on the voice case. Do not put the belt on yet.
2. Attach the battery cable, ring scanner and audio device to the HX3.
3. Slip the HX3 into the voice case. Be sure the screen and keypad are visible through either the
opening (voice case without clear window) or through the clear window (voice case with
window).
window).
4. Slide the battery cable through the protective loop at the bottom of the voice case. Make sure
the tethered cable for the ring accessory is on the outside of the voice case.
5. Slip the battery into the battery sleeve and connect the battery to the battery cable. The battery
charge terminals (small metallic circles) should always be covered by the sleeve.