LXE hx3 Reference Guide
34
Bluetooth
HX3 Reference Guide
E-EQ-HX3RG-C
Bluetooth Beep and LED Indications
The following indications relate to the behavior of the mobile Bluetooth scanner, not the HX3.
Beep Type
Behavior
1 beep
Acknowledge label
2 beeps at low frequency
Label rejected
Beep will sound high-low-high-low Transmission
error
Beep will sound low-medium-high
Link successful
Beep will sound high-low-high-low Link
unsuccessful
LED Behavior
Yellow LED blinks at 2 Hz
Linking in progress
Off
Disconnected or unlinked
Yellow LED blinks at 50 Hz
Bluetooth transmission in progress
Yellow LED blinks at the same rate
as the paging beep (1 Hz)
as the paging beep (1 Hz)
Paging
Green LED blinks once a second
Disabled indication
Upon startup, if the mobile Bluetooth scanner sounds a long tone, this means the scanner has not
passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is
repeated. Contact LXE Support for assistance.
passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is
repeated. Contact LXE Support for assistance.
Bluetooth Printer Setup
The Bluetooth managed device should be as close as possible, in direct line of sight, with the HX3
during the pairing process.
during the pairing process.
1. Open the LXEZ Pairing panel [Start | Settings | Control Panel | Bluetooth].
2. Tap Discover. Locate the Bluetooth printer in the discovery panel.
3. Tap and hold on the Bluetooth printer until the right-mouse-click menu appears.
4. Select Pair as Printer to pair the HX3 with the Bluetooth managed printer.
The devices are paired. The Bluetooth managed printer may respond with a series of beeps or
LED flashes.
LED flashes.
Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on
the manufacturer’s web site. Please contact your LXE representative for Bluetooth product
assistance.
the manufacturer’s web site. Please contact your LXE representative for Bluetooth product
assistance.
Note:
If there is no beep or no LED flash from the Bluetooth managed printer, the HX3 and the
printer are currently paired.
printer are currently paired.