LXE hx3 Reference Guide
HX2 Docking/Charging Cradle
57
E-EQ-HX3RG-C
HX3 Reference Guide
HX2 Docking/Charging Cradle
The desktop cradle secures the HX3, recharges the tethered battery and a spare battery (Standard
and Extended), has a protected storage bay for the tethered Ring Scanner when the HX3 is
docked, and enables serial communication with USB devices (host, client, and other USB cabled
devices).
and Extended), has a protected storage bay for the tethered Ring Scanner when the HX3 is
docked, and enables serial communication with USB devices (host, client, and other USB cabled
devices).
Using an external power supply the cradle recharges Standard batteries in approximately 4 hours
(8 hours for the Extended battery). The HX3 does not need to be docked during a spare battery
charging process. See Accessories.
(8 hours for the Extended battery). The HX3 does not need to be docked during a spare battery
charging process. See Accessories.
Remove the voice case before placing the HX3 in the cradle. The HX3 cannot be docked in a
cradle while it is mounted in a hip flip.
cradle while it is mounted in a hip flip.
The cradle LEDs are on the front of the cradle.
B1 LED – Back left battery
charging bay
charging bay
Normal State – Off. With battery and AC power, normal
state may be any state listed in Cradle LEDs.
state may be any state listed in Cradle LEDs.
PWR LED - HX3 docked / on
/ receiving power bay
/ receiving power bay
Normal State – Off. With HX3 in, turned On and AC
power, normal state is On.
power, normal state is On.
B2 LED – Back right battery
charging bay
charging bay
Normal State – Off. With battery and AC power, normal
state may be any state listed in Cradle LEDs.
state may be any state listed in Cradle LEDs.
IMPORTANT –
• Do not put the HX3 into Suspend Mode (using Start | Suspend or by tapping the
Power key) while the HX3 is connected to peripheral devices (or ActiveSync)
through the connectors on the cradle. The HX3 is unable to maintain the connection
during Suspend Mode.
through the connectors on the cradle. The HX3 is unable to maintain the connection
during Suspend Mode.
• If the USB connections are interrupted due to a Suspend operation – then when the
HX3 resumes, disconnect the cables and then reconnect the cables again to initiate
USB and/or ActiveSync connection again.
USB and/or ActiveSync connection again.