LXE hx1 Reference Guide

10 

Suspend /Resume Button 

HX1 Reference Guide 

E-EQ-HX1RG-B 

The Suspend /Resume button can be used to suspend or resume the HX1.  It can also be used to 
reset the HX1. 

•  When the HX1 is on, pressing and releasing the Suspend / Resume button places the 

HX1 in Suspend mode.  In approximately 1.5 seconds, the Power LED goes out 
indicating the HX1 is in Suspend mode. 

•  When the HX1 is in Suspend mode, pressing and releasing the Suspend / Resume 

button resumes the HX1. 

•  Pressing and holding the Suspend / Resume button for more than eight seconds 

resets the HX1. 

The Power LED is built into the Suspend / Resume switch.  The color and behavior of the 
POWER LED indicated the status of the HX1: 

• 

 light, blinking once every three seconds – Indicated the HX1 is receiving a 

software upgrade. 

• 

 light, blinking once per second – Indicated the HX1 has started the browser. 

• 

 light, on solid – The green light remains on solid for approximately 30 

seconds after the HX1 has booted.  Once the browser has loaded the light blinks 
once per second. 

• 

 light, blinking rapidly – Indicates an error has occurred during the system 

install. 

•  No lights – Indicated the HX1 is either in Suspend mode or has no battery power. 
•  Alternate 

 blinking light – Indicates the HX1 is out of range. 

All data is entered into the HX1 by speaking into the headset’s microphone when prompted. 

The HX1 is configured remotely using a PC and ActiveSync.  Please refer to Chapter 3, “System 
Configuration” for more information. 

Voice software installed on the HX1 may provide additional configuration options.  Please refer to 
documentation for your voice software for information.