LXE hx1 Reference Guide
Cisco Radio
77
E-EQ-HX1RG-B
HX1 Reference Guide
EAP-TLS
Prerequisites
• Cisco driver must be 2.60 or higher, firmware must be 5.60.11 or higher.
• Use the WZC utility.
• The Cisco ACU profile must be set to <External Settings>.
• The date and time must be properly set on the HX1.
• The SSID of the wireless network.
• Network credentials (user name, password and domain).
• Certificates from CA server (see “Certificates” later in this chapter). EAP-TLS uses
• Use the WZC utility.
• The Cisco ACU profile must be set to <External Settings>.
• The date and time must be properly set on the HX1.
• The SSID of the wireless network.
• Network credentials (user name, password and domain).
• Certificates from CA server (see “Certificates” later in this chapter). EAP-TLS uses
both a Root CA certificate and a User certificate.
Make sure the date and time are correctly set on the HX1.
Import the Root CA certificate into the Trusted Authorities list. Import the User certificate and
Private Key into the My Certificates list (alternatively, enroll.exe may be used instead of the
import function). Please see “Certificates” later in this chapter for information on generating,
copying and importing the certificate.
Private Key into the My Certificates list (alternatively, enroll.exe may be used instead of the
import function). Please see “Certificates” later in this chapter for information on generating,
copying and importing the certificate.
To use EAP-TLS, start the Wireless Zero Config utility if it has not already started.
Figure 4-41 Wireless Information Tab
Make sure the “Notify me when new network are available” checkbox is not checked.
Double click “Add New…” to bring up the Wireless Network Properties screen.