Amana amc1070x User Manual

Page of 12
6
MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, “:” will 
appear in the display. If the “:” appears in the display at any other 
time, a power failure has occurred. Reset the clock if needed.
While the microwave oven is being programmed, the display 
shows cooking power, quantities, weights and/or prompts. When 
the microwave oven is not in use, the display shows the time of 
day (if the Clock is set) or Timer countdown.
Start
The START (START ENTER) pad begins any function. If cooking is 
interrupted, touching START will resume the preset cycle.
NOTE: To avoid unintentional operation of the microwave oven, 
a cooking function cannot be started if the microwave oven door 
has been closed for about 5 minutes or more. “DOOR” will 
appear in the display until the door is opened and closed.
Off
The OFF (OFF/CANCEL) pad clears any incorrect command and 
cancels any program during cooking. It will not erase the time of 
day.
The microwave oven will also turn off when the door is opened. 
Close the door and touch START to resume the cycle.
Add A Minute
The ADD A MINUTE pad starts the microwave oven for 1 minute 
at 100% power. More cook time may be added in 1-minute 
increments by touching ADD A MINUTE repeatedly.
The Add A Minute function may be used only when no other 
function is operating.
NOTE: To avoid unintentional operation of the microwave oven, 
a cooking function cannot be started if the microwave oven door 
has been closed for about 5 minutes or more. “DOOR” will 
appear in the display until the door is opened and closed.
Clock
This is a standard 12-hour clock (12:00-11:59).
To Set:
The microwave oven must be off.
1. Touch CLOCK.
2. Touch number pads to enter correct time of day.
3. Touch CLOCK.
Timer
NOTE: The Timer does not start or stop the microwave oven.
Cook functions may be used while the Timer is counting down. 
When the cook function is active in the display, touch TIMER to 
see the Timer count down for 5 seconds.
To Set:
1. Touch TIMER.
2. Touch number pads to enter desired time.
3. Touch START.
When the set time ends, the end-of-Timer tone will sound.
4. While the Timer countdown is active in the display, touch 
CANCEL to cancel the Timer. 
If a cook function countdown is active in the display, touch 
TIMER to show the Timer countdown, then touch CANCEL to 
cancel the Timer. Touching CANCEL while a cook function 
countdown is active in the display will cancel the cook 
function, not the Timer.
The time can be reset during the countdown by canceling Timer, 
then repeating the above steps.
ENTER TIMER CODE AMT
COOK TIME
OFF
ON
LOCK
OZ
MEM
DEF
LB
CLOCK