ECS A790GXM-AD3 User Manual

33

Using BIOS

This page sets up some parameters for system power management operation.

Select the ACPI
state used for
System Suspend.

Help Item

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

              Power Management Setup

Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory.

This item enables your computer to automatically restart or return to its operating
status.

The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.

The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.

This item allows you to enable or disable the USB device wakeup function from S3
mode.

ACPI Suspend Type

  S3

PWRON After PWR-Fail

Power Off

Resume By RING

Disabled

Resume By PCI/PCI-E/Lan PME

 Disabled

Resume By USB (S3)

Disabled

Resume By PS2 KB (S3)

Disabled

Resume By PS2 MS (S3)

Disabled

Resume on RTC Alarm

Disabled

F10: Save      ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.

This item enables or disables you to allow mouse activity to awaken the system from
power saving mode.