Samson xpl200 User Guide

•  Operating a microphone or turntable in front of a speaker is a sure formula for 

feedback and/or rumble problems, so always place the Expedition Pro in front 

of any mics or turntables that are being used.

•  Use the Expedition Pro upright for all “front-of-house” PA applications; use it in 

its tilt-back position only for onstage monitoring.

•  Always raise the speakers as high above the audience as is practicable for maxi-

mum coverage.

•  Use sufficient enclosures for the space you’re in.  The larger the space, the more 

speakers will be required.

The underside of the Expedition Pro contains a 1-3/8" stand mount socket that 

allows it to be raised up on any standard speaker pole mounting (such as the 

Samson TS50 or TS100 speakers stands).  Pole-mounting is generally advisable 

when you want to maximize the distance that the Expedition Pro covers (some-

times called speaker “throw”).

If you are using an DB1500 subwoofer, you can use its integral pole mount to place 

an XPL100, XPL200 or XPL300 immediately above it, creating a complete column 

of sound.

As shown in the illustration below, the top panel of the Expedition Pro contains a 

number of fly points, located in compartments to the left and right of the wireless 

receiver compartment.  The covers placed over these compartments are simply 

attached with double-sided sticky tape, so just pull up to remove.

ENGLISH

12