Haier hr-125 User Guide

The surface of evaporator ices up when 

the refrigerator is working. When the frost 

layer is thick as 3mm, the refrigerator must 

be defrosted and cleaned. Otherwise, it 

may results in lower efficiency and high 

energy consumption. 

1. Take out foods and ice tray. Keep the 

door open. 

2. Set  the  temperature  at  ‘0’  position. 

After defrosting, dry the water tray and 

then replace it in the refrigerator. Reset 

the temperature regulator to its original 

position. 

 Fill the 3/4 ice tray with water and then 

place it in the lower part of the evaporator.

 Set the temperature regulator at ‘7’. 

After making ice, reset the temperature 

regulator to its original position. Otherwise 

foods may get frozen. 

1. Knock the ice tray lightly to loose it. 

2. Hold the bottom of the ice tray in warm 

water for a while. 

3. Twist the ice tray to loose the ice cubes. 

Note:  Never use a sharp or pointed item 

to defrost or loose the ice tray. Otherwise 

it’s likely to damage the surfaces of the 

evaporator and result in the leakage of 

refrigerant. The manufacturer takes no 

responsibility for cost of the reparation 

even the appliance is under guarantee. 

.7.