Ampeg ba115hp User Guide
47-683-01 • 012203
BA115HP/BA210
Bassamp Cube
TECHNICAL SPECIFICATIONS:
OUTPUT POWER RATING
220 Watts at 4 ohms @5% THD
MAX INPUT LEVELS
0dB Input: 2.00V RMS
-15dB Input: 8.00V RMS
CD Input: 7.75V RMS
-15dB Input: 8.00V RMS
CD Input: 7.75V RMS
LINE OUT LEVEL
1.78V RMS
HEADPHONE OUT LEVEL 900mV RMS
GAIN
GAIN
46dB (input to speaker out, tones @5)
STYLE
1 = -25dB @500Hz
2 = -12dB @500Hz
3 = flat
4 = +5dB @2kHz and above
5 = -6dB @50Hz and below
2 = -12dB @500Hz
3 = flat
4 = +5dB @2kHz and above
5 = -6dB @50Hz and below
LOW
40dB range @50Hz
MID
30dB range @500Hz
HIGH
40dB range @10kHz
SPEAKER SPECS
BA115HP: (1) 15”, 250W, 4 ohm, 2.5” voice coil dia, 56 oz. magnet
(1) 1” compression driver
BA210:
(2) 10”, 150W, 8 ohm, 2” voice coil dia, 30 oz. magnet
(1) 1” compression driver
(1) 1” compression driver
POWER REQUIREMENTS
120VAC, 60Hz, 320VA
100/115VAC, 50/60Hz, 320VA
230VAC, 50/60Hz, 320VA
100/115VAC, 50/60Hz, 320VA
230VAC, 50/60Hz, 320VA
SIZE AND WEIGHT
21” W x 21” H x 15-1/2” D; 86 lbs.
Ampeg continually develops
new products, as well as
improves existing ones. For this
reason, the specifications and
information in this manual are
subject to change without
notice.
CAUTION: THIS SPEAKER IS CAPABLE
OF PRODUCING HIGH SOUND PRES-
SURE LEVELS. CONTINUED EXPO-
SURE TO HIGH SOUND PRESSURE
LEVELS CAN CAUSE PERMANENT
HEARING IMPAIRMENT OR LOSS.
USER CAUTION IS ADVISED, AND EAR
PROTECTION RECOMMENDED IF
UNIT IS OPERATED AT HIGH VOLUME.