Frigidaire fas296p2a1 Installation Instruction
Installation Instructions
for Heavy duty
Please real ALL installations before installing. Two
or more people are recommended to install this
product. If a new electrical outlet is required, have
the outlet installed by a qualified electrician before
installing unit.
or more people are recommended to install this
product. If a new electrical outlet is required, have
the outlet installed by a qualified electrician before
installing unit.
Preliminary Instructions
Do the following before starting to install unit. See
illustrations below.
illustrations below.
1. Check window opening size - the mounting
parts furnished with this air conditioner are
made to install in a wooden sill double-hung
window. The standard parts are for a window
opening of 32''(812 mm) minimum to 43''(1092
mm) maximum width. Open sash to a minimum
of 20'' (508 mm). (FIG. 1)
parts furnished with this air conditioner are
made to install in a wooden sill double-hung
window. The standard parts are for a window
opening of 32''(812 mm) minimum to 43''(1092
mm) maximum width. Open sash to a minimum
of 20'' (508 mm). (FIG. 1)
2. Check condition of window - all wood parts
of window must be in good shape and able to
firmly hold the needed screws. If not, make
repairs before installing unit.
of window must be in good shape and able to
firmly hold the needed screws. If not, make
repairs before installing unit.
3. Check your storm windows - if your storm
window frame does not allow the clearance
required, correct by adding a piece of wood as
shown in FIG. 2, or by removing storm window
while room air conditioner is being installed.
(Continued)
window frame does not allow the clearance
required, correct by adding a piece of wood as
shown in FIG. 2, or by removing storm window
while room air conditioner is being installed.
(Continued)
P/N:819042102-01
SASH
20” MIN.
1/2” MIN.
STORM WINDOW FRAME OR
OTHER OBSTRUCTION
OTHER OBSTRUCTION
Fig. 1
SASH
20” MIN.
1/2” MIN.
STORM WINDOW FRAME OR
OTHER OBSTRUCTION
OTHER OBSTRUCTION
Fig. 2
BOARD THICKNESS AS
REQUIRED, ALONG
ENTIRE STOOL. FASTEN
WITH TWO NAILS OR
SCREWS.
REQUIRED, ALONG
ENTIRE STOOL. FASTEN
WITH TWO NAILS OR
SCREWS.
1 1/2” MIN.
SIDE
ACCORDION
(LEFT)
ACCORDION
(LEFT)
SIDE
ACCORDION
(RIGHT)
ACCORDION
(RIGHT)
DOUBLE
SIDED SEAL
SIDED SEAL
TOP CHANNEL
MOUNTING
BRACKET
BRACKET
END CAP &
LEVELING LEGS
LEVELING LEGS
ANGLE
BRACKET
BRACKET
1/4” NUT
1/4”X1 ”
BOLT
BOLT
SASH SEAL
WINDOW
FOAM
FOAM
1
2
/