Extreme reachnxt 100-8t Quick Setup Guide

120480-00 Rev. 01

© 2009 Extreme Networks, Inc. All Rights Reserved

This guide describes how to install the ReachNXT

™

 100-8t port extender and configure the uplinked 

ExtremeXOS switch to detect and initialize the port extender.

Only trained service personnel should perform service to Extreme Networks switches and their 
components. Trained service personnel have read all related installation manuals, have the technical 
training and experience necessary to be aware of the hazards to which they are exposed in performing a 
task, and are aware of measures to minimize the danger to themselves or other persons.

Before installing a ReachNXT 100-8t port extender into your network:

●

Read the latest installation and safety information provided in the ReachNXT 100-8t User Guide.

●

See Appendix A of the ReachNXT 100-8t User Guide for additional information regarding regulatory 
compliance certifications.

ReachNXT 100-8t User Guide

http://www.extremenetworks.com/services/hardware-userguide.aspx. 

You can download the ReachNXT 100-8t User Guide and other Extreme Networks product 
documentation from:

http://www.extremenetworks.com/services/documentation.aspx

Before you begin, make sure you have the following:

●

ReachNXT 100-8t ExtremeXOS port extender

●

ExtremeXOS switch to serve as the uplinked switch. The uplinked ExtremeXOS switch must be 
running ExtremeXOS version 11.2 or higher.

●

Cable to connect the ReachNXT 100-8t to the uplinked ExtremeXOS switch

Depending on your installation, you may also have the following:

●

Optional SFP module, if one will be used as the connector to the uplinked ExtremeXOS switch

●

Optional magnet mounting kit, if you will mount the ReachNXT 100-8t in a fixed location