SATO MB410i User Guide
Unit 2: Overview
Page 2-6
PN 9001190C
MB400i/MB410i Operator Manual
U
SAGE
P
RECAUTIONS
Table 2-3, Usage Precautions
Location
Do not locate the printer in areas with high humidity or dew. If
dew forms inside the printer, immediately turn it off, and do not
use it until the dew has dried up. Otherwise, continued use
creates the danger of electric shocks or printer damage.
dew forms inside the printer, immediately turn it off, and do not
use it until the dew has dried up. Otherwise, continued use
creates the danger of electric shocks or printer damage.
Power
•
Do not use wet hands to operate the power switch, replace
the battery pack or unplug the AC adapter or battery charger.
Doing so creates the danger of electric shocks.
the battery pack or unplug the AC adapter or battery charger.
Doing so creates the danger of electric shocks.
•
The AC adapter set provided for this printer is specific to this
printer. Do not use it for other electrical equipment.
printer. Do not use it for other electrical equipment.
Print Head
•
The print head gets very hot after printing. To avoid burns,
take care when replacing the label or cleaning the printer just
after printing.
take care when replacing the label or cleaning the printer just
after printing.
•
Touching the end of the print head with bare hands may
cause injury. Take care when replacing the label or cleaning
the printer.
cause injury. Take care when replacing the label or cleaning
the printer.
•
Do not try to replace the print head by yourself. Doing so cre-
ates the danger of injury, burns, or electric shocks.
ates the danger of injury, burns, or electric shocks.
Battery Pack
•
When replacing the Battery Pack use only the specified
design.
design.
•
Make sure to install the pack in the correct orientation. Incor-
rectly replacing the battery creates the danger of injury or
damage to surrounding areas, if an explosion is caused.
rectly replacing the battery creates the danger of injury or
damage to surrounding areas, if an explosion is caused.
•
To dispose of a small rechargeable battery (Lithium ion bat-
tery), seal the metal contacts with tape, and ask our sales
representative or service center for the measures to be taken
to recycle the reusable materials. Do not place the battery
pack together with other batteries such as dry batteries.
tery), seal the metal contacts with tape, and ask our sales
representative or service center for the measures to be taken
to recycle the reusable materials. Do not place the battery
pack together with other batteries such as dry batteries.
Storage
If you have no plan to use the printer for a long time, remove the
battery pack from the printer and/or unplug the AC adapter from
the wall outlet before storing the printer (if you were using the AC
adapter as the power source).
battery pack from the printer and/or unplug the AC adapter from
the wall outlet before storing the printer (if you were using the AC
adapter as the power source).
Maintenance
For safe maintenance or cleaning of the printer, make sure to
remove the battery pack and the AC adapter from the printer.
remove the battery pack and the AC adapter from the printer.