SATO MB410i User Guide
Unit 4: Operation and Configuration
MB400i/MB410i Operator Manual
PN 9001190C
Page 4-9
USB 1.1 SPECIFICATIONS
The Universal Serial Bus (USB) interface is a factory installed option that must be specified at the
time of order. It required a driver (shipped with each printer that has the interface installed) that
must be loaded on your PC and the PC must be configured to support USB peripherals using
Microsoft Windows. Details for loading the USB driver are contained in the USB Interface
manual that is shipped with each printer with a USB Optional interface installed. Up to 127
devices may be connected to a USB port.
The Universal Serial Bus (USB) interface is a factory installed option that must be specified at the
time of order. It required a driver (shipped with each printer that has the interface installed) that
must be loaded on your PC and the PC must be configured to support USB peripherals using
Microsoft Windows. Details for loading the USB driver are contained in the USB Interface
manual that is shipped with each printer with a USB Optional interface installed. Up to 127
devices may be connected to a USB port.
PRINTING VIA THE OPTIONAL WIRELESS LAN INTERFACE
To print using the Wireless LAN MB400i/410i, you need to have a properly configured wireless
LAN set up. The next step is to configure the MB400i/410i to share the same network settings in
order to establish communication.
LAN set up. The next step is to configure the MB400i/410i to share the same network settings in
order to establish communication.
1. Check the DIP Switches:
The printer’s DIP switches are factory set for WLAN operation. Check that DIP switch 1 is
OFF and DIP switch 2 is ON. In case you need to reset other switches, refer to the DIP-Switch
settings in the table, Enabling and Disabling Special Functions, in the chapter, Operating
Modes.
OFF and DIP switch 2 is ON. In case you need to reset other switches, refer to the DIP-Switch
settings in the table, Enabling and Disabling Special Functions, in the chapter, Operating
Modes.
USB 1.1 SPECIFICATIONS
Transfer Rate
11Mbits per second
Communication Control
STATUS3 return
Code type
ASCII character code, JIS Kanji code
Connector
Mini B type
Max. Receive buffer
128 KB
When implementing the flow control into the hardware, the flow
control will activate when "buffer full" is detected and deactivate
as soon as "buffer full" is released. During that span the flow
control manages the information flow and prevents a buffer
overflow.
When implementing the flow control into the hardware, the flow
control will activate when "buffer full" is detected and deactivate
as soon as "buffer full" is released. During that span the flow
control manages the information flow and prevents a buffer
overflow.
Near full
occured
occured
Near full
released
released
0MB
128KB
Remaining 24KB
Remaining 52KB