SATO MB410i User Guide
Unit 4: Operation and Configuration
Page 4-24
PN 9001190C
MB400i/MB410i Operator Manual
PRINTING PROCEDURE
After the proper setup and basic configuration procedures, you are ready to print with the
MB400i/410i.
MB400i/410i.
1. Make sure the host computer is ready to transmit data, and ensure that the STATUS LED is lit
or blinking. (Press the PRINT button to take the printer ONLINE).
Figure 4-20, Pulling the Printed Label Toward You
2. Start the print job from the computer. When printing is finished, pinch either the left or right
corner of the printed roll of label(s) and tear it off in the direction of the arrow in the diagram.
N
OTES
:
•
The number of sheets you can print is determined by the printer’s mode (continuous or dis-
pense mode).
pense mode).
•
When printing linerless labels and you have torn the labels at a wrong place, stop the printing
and follow the instructions on the next page to correct the print job.
and follow the instructions on the next page to correct the print job.
1234567
AB C
DE FG
abcd
efg
1234567
AB
C DE
F G
abcd
efg