SATO MB410i User Guide
Unit 4: Operation and Configuration
Page 4-30
PN 9001190C
MB400i/MB410i Operator Manual
HEAD CHECK SETTING MODE
Head checking can be applied to one of two areas: the normal print area and the barcode print
area. In the normal print area, it checks all printed data. In the barcode print area, it only checks
the area where the barcode is. To specify the area subjected to a head check, follow the settings
in the table below:
area. In the normal print area, it checks all printed data. In the barcode print area, it only checks
the area where the barcode is. To specify the area subjected to a head check, follow the settings
in the table below:
You can check the current setting with a test printout as described in “Performing a Test Print” in
this section of this manual.
this section of this manual.
When setting the Head Check options, the STATUS LED blinks green, and turns into a steady
green signal upon completion of setting. Turn off the printer ONLY when the STATUS LED is a
steady green light.
green signal upon completion of setting. Turn off the printer ONLY when the STATUS LED is a
steady green light.
Table 4-4, Setting Head Check Area (cover must be left open)
H.Check
setting
setting
DSW-1 DSW-2 DSW-3 DSW-4 Other
keys
Normal
Print
Area
Area
OFF
ON
OFF
ON
hold
down
PRINT
button
down
button
Disable
H.
Check
H.
Check
OFF
ON
OFF
ON
hold
down
FEED
button
down
FEED
button
Barcode
Print
Area
Area
ON
OFF
OFF
ON
hold
down
PRINT
button
down
button
Disable
H.
Check
H.
Check
ON
OFF
OFF
ON
hold
down
FEED
button
down
FEED
button