IBM 380Z User Guide
b
Click on Properties.
The “Properties” windows provide information about the attributes
and drivers associated with the selected PC Card.
and drivers associated with the selected PC Card.
Attributes
Slot:
The slot number and assigned name for the slot.
Card:
The type of this PC Card.
Manufacturer:
The manufacturer of the PC Card.
IRQ:
The interrupt request being used (if relevant).
Port:
The I/O address associated with a communication
port (if relevant).
port (if relevant).
DOS Device:
The communication port used by this device (if
relevant).
relevant).
Name
When you select device drivers, the following information is
displayed:
displayed:
Driver:
The full path to the driver for this PC Card.
Version:
The version for the current driver.
Stopping the PC Card
If you are removing a PC Card, you must first stop it. The system
might freeze or data might be lost if a PC Card is removed before it
is stopped.
might freeze or data might be lost if a PC Card is removed before it
is stopped.
Note:
You can stop only one card at a time. After invoking stop,
you cannot stop another card until the first stop is either
completed or fails.
you cannot stop another card until the first stop is either
completed or fails.
To stop a card, select Stop from the “Actions” menu.
Power to the slot is turned off when a card is “stopped.” You can
remove ATA cards. To prevent loss of data and other unpredictable
machine behavior, make sure the stop operation is complete before
you remove the cards.
remove ATA cards. To prevent loss of data and other unpredictable
machine behavior, make sure the stop operation is complete before
you remove the cards.
Chapter 5. Using Your Computer with a PC Card
49