IBM 380Z User Guide
4
You can change the following registered information for the PC
Card. The items that can be changed differ depending on the
PC Card.
Card. The items that can be changed differ depending on the
PC Card.
Card ID
I/O port address
I/O port address
IRQ level
COM number of the serial port
Memory window address
Memory window size
Card offset address
COM number of the serial port
Memory window address
Memory window size
Card offset address
5
Click on the OK button, and save the changes.
To cancel the changes, click on the Cancel button.
Updating the CONFIG.SYS File
For PC Card Director to work correctly, the PC Card device drivers
must be registered in the CONFIG.SYS file. These drivers are
automatically registered in the CONFIG.SYS file when you install PC
Card Director following the instructions in Installing a New Operating
System and Its Device Drivers.
must be registered in the CONFIG.SYS file. These drivers are
automatically registered in the CONFIG.SYS file when you install PC
Card Director following the instructions in Installing a New Operating
System and Its Device Drivers.
The following section describes the standard rules for each driver
registered in the CONFIG.SYS file for your reference.
registered in the CONFIG.SYS file for your reference.
Registered Drivers and Standard Rules
The following is a sample of a CONFIG.SYS file:
:
BASEDEV=PCMCIA.SYS
--→ Card Services
BASEDEV=IBM2SS14.SYS
--→ Socket Services
BASEDEV=AUTODRV2.SYS
--→ Auto Configurator
DEVICE=C:\THINKPAD\VPCMCIA.SYS
--→ Virtual Card Services
:
DEVICE=C:\THINKPAD\xxxxxxx.SYS --→ Storage card device driver
:
REM PC_Card_Client_Device_Driver
:
DEVICE=C:\THINKPAD\$ICPMOS2.SYS --→ Power Management Support driver
62
IBM ThinkPad 380Z Online User's Guide