IBM 380Z User Guide
Installing Software for Windows 98
This section describes the installation procedures for Windows 98
and its software for your computer.
and its software for your computer.
Overall Procedure
1
Have the Windows 98 installation package in hand.
2
Back up your software and personal data files on the hard disk.
3
Create the Windows 98 Startup Disk from the preloaded
Windows 98 as follows:
Windows 98 as follows:
|
a) Double-click on Add/Remove Program in the Control
|
Panel.
|
b) Click on the Startup Disk tab.
|
c) Follow the instruction on the screen.
4
Create the installation diskettes of the device drivers using the
Diskette Factory program. You need to create at least the
following device driver diskettes:
Diskette Factory program. You need to create at least the
following device driver diskettes:
5
Install Windows 98 and the software.
Note:
The Windows 98 Startup Disk includes real-mode CD-ROM
drivers, so that you can use the built-in CD-ROM drive when
you start the system with the CD-ROM.
drivers, so that you can use the built-in CD-ROM drive when
you start the system with the CD-ROM.
Device Driver
Diskette Name
ThinkPad Configuration
program
program
Utility Diskette for Windows 98
Utility Diskette for DOS, Personalization
Utility Data Disk II for Windows 98
Utility Diskette for DOS, Personalization
Utility Data Disk II for Windows 98
Display driver
Video Features Diskette (NM2200) for
Windows 95/98
Windows 95/98
Audio device driver
Audio Features Diskette for Windows 95/98
TrackPoint driver
TrackPoint Driver Diskette II for Win95/98/NT
Installing Microsoft Windows 98
You can install Windows 98 by restoring the original preloaded image
from the Recovery CD. Refer to the
from the Recovery CD. Refer to the
User's Reference for how to use
the Recovery CD.
80
IBM ThinkPad 380Z Online User's Guide