IBM 560x Hardware Manual
TFT Panel
When replacing: Align the LCD connector to the inverter
card to ensure a good connection.
Step
Screw No. (See page 59)
Qty
Torque
.2/
8
2
3
kgcm
When replacing: Make sure you use the correct screw, and
tighten all screws firmly to the torque shown in the table if you
have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 22 if you do not have a torque screwdriver).
tighten all screws firmly to the torque shown in the table if you
have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 22 if you do not have a torque screwdriver).
80
IBM ThinkPad 560X (2640-60x, 70x) HMM