IBM 560x User Guide
Installing the ThinkPad Features Program for OS/2 Warp
Installing IBM OS/2 Warp
Follow the instructions in the operating-system documentation. After
OS/2 has been successfully installed, go to “Installing the ThinkPad
Features Program for OS/2 Warp.”
OS/2 has been successfully installed, go to “Installing the ThinkPad
Features Program for OS/2 Warp.”
Important
When installing the operating system, enable support of PCMCIA.
PCMCIA will
PCMCIA will
not be supported if you select Install Preselected
Features.
Installing the ThinkPad Features Program for OS/2 Warp
Note:
When installing an operating system,
you need to install the ThinkPad
Features program.
When installing an operating system,
you need to install the ThinkPad
Features program.
To install the ThinkPad Features program:
1
Start OS/2.
2
Insert the Utility Diskette 2 into the diskette drive.
3
Install the ThinkPad System Management device driver:
a) Open OS/2 System and then System Setup.
b) Select Device Driver Install.
c) Click on the Install... button.
d) Click on ThinkPad System Management Device Driver;
then click on OK.
Chapter 7. Installing Software
107