IBM 560x User Guide

Page of 263
Installing the ESS AudioDrive Support Software for OS/2 Warp
Installing the ESS AudioDrive Support Software for OS/2
Warp
Note: 
When installing an operating system,
you need to install the ESS
AudioDrive support software.
When installing OS/2 Warp, the software might detect the
AudioDrive chip installed in your computer, and automatically install
the required software in your hard disk drive.
However, the version of the AudioDrive support software supplied
with OS/2 Warp might be a version different from the one needed for
your computer. It is recommended that you reinstall the AudioDrive
support software.
Have ready the AudioDrive Features Diskette; then install the
AudioDrive support software as follows:
1
Turn on the computer and start OS/2.
Note: 
To open the OS/2 full screen:
1. Select OS/2 System.
2. Select Command Prompts; then
select OS/2 Full Screen.
2
Open the OS/2 full screen command prompt.
3
Insert the AudioDrive Features Diskette for OS/2 into the
diskette drive.
4
Type 
A:ESUNINST
 at the command prompt; then press Enter.
Necessary backups are created.
5
Type 
A:MINSTALL
 at the command prompt; then press Enter.
6
Select AudioDrive ES1688 from the list.
Make sure the source drive is 
A:
.
If you have Win-OS/2 installed on your computer, also select
ES1688 WinOS2/Windows Audio.
7
Click on Install; then follow the instructions on the screen.
8
When you have completed the installation, remove any
diskette from the diskette drive, shut down OS/2; then restart
the computer.
110
IBM ThinkPad 560 User's Guide