IBM 560x User Guide
Advanced Information for PC Cards
D O S
W I N
Registered Drivers and Standard Rules for
DOS and Windows
DOS and Windows
The following is a sample of the CONFIG.SYS file for DOS and
Windows:
Windows:
:
DEVICE=C:\DOS\EMM386.EXE FRAME=D
X=C8
-CFFF
:
DEVICEHIGH=C:\THINKPAD\IBMDSS 1.SYS
(Socket Services)
DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS
(Card Services)
DEVICEHIGH=C:\THINKPAD\DICRMU 1.SYS /MA=C8
-CFFF
(↑ Resource Map Utility)
DEVICEHIGH=C:\THINKPAD\$ICPMDOS.EXE
:
(↑ Power Management Support driver)
REM PC_Card_Client_Device_Driver
:
DEVICEHIGH=C:\THINKPAD\xxxxxxx.SYS
(↑ Storage card device driver)
DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS
:
(↑ Auto Configurator)
Rule 1
When using the PCMCIA drivers with the Software EMS
driver (EMM386.EXE), you must specify the
driver (EMM386.EXE), you must specify the
X=
parameter
for EMM386.EXE. This is to avoid conflict in the memory
area used by the PCMCIA drivers and the Software EMS
driver.
area used by the PCMCIA drivers and the Software EMS
driver.
Rule 2
Socket Services, Card Services, and Resource Map Utility
must be listed in this order.
must be listed in this order.
Rule 3
The Power Management Support driver must be listed
after the Resource Map Utility.
after the Resource Map Utility.
Rule 4
The PC Card Client device driver must be listed before
the Auto Configurator.
the Auto Configurator.
Rule 5
When using storage cards, you must install the device
driver according to the card type, as listed below.
driver according to the card type, as listed below.
Using only an ATA card:
DEVICEHIGH=C:\THINKPAD\PAWATA.SYS
Using an ATA card and an SRAM card:
198
IBM ThinkPad 560 User's Guide