IBM 770X Quick Setup Guide

Parts Number: 27L3404

ThinkPad 770X

Quick Reference and Service Information

Your Name:

Company Name:

Model Number:

Serial Number:

Company or Reseller Service:

IBM Service Web Site:

IBM Service Number:

Locations

Indicator panel

TrackPoint

Click buttons

Latch

Latch with

UltraBay

indicator

Bay eject levers

UltraBay II

PC Card slots

Telephone
jack

External diskette
drive
connector

Parallel
connector

Rear infrared port

Serial connector

Power jack

Power switch

Headphone jack

Battery pack

Microphone/
line-in jack

System-expansion
connector

Universal serial bus
connector

Attaching Options

Function Keys

You want to...

You need to...

Swap the device in
the UltraBay II

Release the bay eject levers; then a
message appears. Make sure the
LED stays green and there is no
beep; then swap the device.

Attach the diskette
drive externally

Power off your computer; then
attach the external diskette drive.

Note:

Some devices or configurations might not support hot

plugging or unplugging.

If the LED is blinking orange, do not attempt to swap the

device.

Result

Displays the battery power status indicator or
erases it if it is displayed. (The Fuel-Gauge
program must first be activated.)

Places the computer in standby mode.

Places the computer in suspend mode.

Changes computer display output locations.

Notes:

Displays computer output in XGA (full-screen)
mode. If the computer is equipped with a
13.7-inch SXGA display and used in standard
VGA mode, you cannot use this function.

F11

Changes the power mode.

F12

Places the computer in hibernation mode.