IBM 770e Quick Setup Guide
Parts Number: 05L2163
Your Name:
Company Name:
Model Number:
Serial Number:
Company or Reseller Service:
IBM Service Web Site:
IBM Service Number:
Location
Telephone
jack
jack
PC card slots
UltraBay II
Bay eject levers
LED
Click buttons
TrackPoint
LCD indicator
panel
panel
Replacing the UltraBay II
Device
Device
Function Keys
You want to...
You need to...
ThinkPad 770E/770ED
Quick Reference and Service Information
swap the device in
the UltraBay II
the UltraBay II
release the bay eject levers; then a
message appears. Make sure the
LED stays on green and there is no
beep; then swap the device.
message appears. Make sure the
LED stays on green and there is no
beep; then swap the device.
attach the diskette
drive externally
drive externally
power off your computer; then
attach the external diskette drive.
attach the external diskette drive.
Note:
Some devices or configuration might not support Hot
plug.
If the LED is blinking orange, you cannot operate.
Fn
+
Result
F2
Displays the battery power status indicator or
erases it when it is being displayed. (The Fuel
program must first be activated.)
erases it when it is being displayed. (The Fuel
program must first be activated.)
F3
Places the computer in standby mode.
F4
Places the computer in suspend mode.
The IBM Service Number for your country can be found in the
International Hardware Service Information booklet shipped with
your computer.
International Hardware Service Information booklet shipped with
your computer.
F7
Changes computer display output locations.
F8
Changes computer LCD modes.
F11
Changes the power modes during battery-power
operation
operation
Notes:
F12
Places the computer in hibernation mode.
Copyright IBM Corp.1998