IBM A21e Hardware Manual

Page of 142
Error messages
Symptom or error
FRU or action, in sequence
Device address conflict.
1. Load Setup Defaults in
IBM BIOS Setup Utility.
2. Backup battery.
3. System board.
Allocation error for device.
1. Load Setup Defaults in
IBM BIOS Setup Utility.
2. Backup battery.
3. System board.
Failing bits: nnnn.
1. DIMM.
2. System board.
Invalid system configuration
data.
1. DIMM.
2. System board.
I/O device IRQ conflict.
1. Load Setup Defaults in
IBM BIOS Setup Utility.
2. Backup battery.
3. System board.
Operating system not found.
1. Check that the operating
system has no failure and is
installed correctly.
2. Enter IBM BIOS Setup
Utility and see whether
the hard-disk drive and
the diskette drive are
properly identified
.
3. Reseat the hard-disk drive.
4. Reinstall the operating
system.
5. Diskette drive.
6. Hard-disk drive.
7. System board.
Hibernation error.
1. Restore the system
configuration to what it
was before the computer
entered hibernation mode
.
2. If memory size has been
changed, re-create the
hibernation file.
Fan error.
Fan.
Unsupported memory
configuration.
Shut down the computer and
remove the extra memory.
Maximum memory size is:
v
256 MB for A21e series and
the low-end models of A22e.
v
512 MB for the high-end
models of A22e.
Symptom-to-FRU index
ThinkPad A21e, A22e, i 1800
49