Peavey UA 35T II Specification Guide

SPECIFICATIONS

Output Power:

35 watts RMS

Power Bandwidth:

50 Hz-20 kHz, .8% THD Mic
50 Hz-20 kHz, .6% THD AUX

Frequency Response:

50 Hz-20 kHz +0, -2 dB
50 Hz-20 kHz +0, -2 dB Mic/Page

THD (1 kHz):

Aux <.05%
Mic <.2%
Page <.2%

S/N Ratio (22 kHz BW):

Tone controls flat/input control max:

85 dB Aux
58 dB Mic/Page

Tone Controls:

Bass ± 10 dB @ 100 Hz
Treble ±10 dB @ 10 kHz

Inputs:

AUX Input: Dual RCA phono jacks,
summed
Mic/Page Input: Screw terminal input
switchable between mic/page

Input Sensitivity:

AUX Input: 100 mV @ 10K
Mic Input: 1 mV @ 1K
Page Input: 120 mV @ 5K

Outputs:

4 ohms, 8 ohms, 600 ohms, 25 V, 70 V

Output Regulation:

Less than 0.5 dB, no load to full load

Controls:

1 AUX input gain control, 1 mic/page gain
control, 1 bass control, 1 treble control, 1
mic/page select switch

Indicators:

Power LED

Protection:

Built-in, with AC line fuse

Power Consumption:

120 volts AC, 60 Hz, 100 watts

Dimensions:

4.25" H x 8.25" W x 13.625" D

Weight:

11.5 pounds

Color:

Gray

Other Features:

Mic/Page input has precedence over the
AUX input (defeatable)

FEATURES
¥ 35 watts into 4 ohms
¥ Mic/page inputs (screw

terminals)

¥ Mic/page select switch
¥ Dedicated program input (screw

terminals and RCA jacks)

¥ Bass and treble controls
¥ Mic/page level controls
¥ Direct 4 ohm output (screw

terminal)

¥ Completely isolated 8 ohm, 600

ohm, 25 volt and 70 volt outputs
(screw terminals)

¥ Shelf-top or wall-mount-

able chassis

DESCRIPTION
The UA

35T II is a high quality

utility amplifier ideally suited for
varying installation requirements.
It produces 35 watts into 4 and 8
ohm direct connections plus a

broad range of line amplification.
Level controls are provided for
mic/page and AUX. The AUX input
is accessible via screw terminals
or RCA jacks. Bass and treble
controls are functional on the
total system (mic/page/AUX).
When a signal is present at the
mix/page input, the AUX input is
muted. This feature is internally
defeated when required.

Twenty-five and seventy volt line
output capability is standard
equipment, and the unit is
packaged for shelf or wall mount-
ing convenience. The user-friendly
control layout, coupled with state-
of-the-art circuit design, ensures
reliable long-term operation and
smooth trouble-free installation.

WALL OR SHELF MOUNTING

The UA 35T II can be mounted on
a vertical or horizontal surface
using the brackets formed on the
bottom panel. For mounting on a
wooden or paneled surface, use
No. 6 x 1/2" or larger wood
screws. For mounting onto a
masonry or drywall type surface,
use fasteners that are designed
for this purpose.

35T II

Utility Amplifier

ARCHITECTURAL ACOUSTICS®

UA 35T S/S 2/24/99 3:02 PM Page 1