Acer 5252 User Guide
16
English
If you prefer to set the boot priority for long-term use, you should select the
Boot submenu.
1
Boot submenu.
1
Turn on your computer and insert the first system recovery disc into the
optical disc drive. Restart your computer.
optical disc drive. Restart your computer.
2
During startup when the Acer logo shows, press the F2 key to enter BIOS
Setup, where you can set system parameters.
Setup, where you can set system parameters.
3
Use the left and right arrow keys to select the Boot submenu.
4
Use the up and down arrow keys to select the IDE1* device.
5
Use the F6 key to move the IDE1* device to the highest boot priority, or use
the F5 key to move other devices to a lower boot priority. Ensure that the
IDE1* device is the highest priority.
the F5 key to move other devices to a lower boot priority. Ensure that the
IDE1* device is the highest priority.
6
Press the ESC key to enter the Exit submenu, press the ENTER key to Exit
Saving Changes. Press the ENTER key again to select Yes. The system will
reboot.
Saving Changes. Press the ENTER key again to select Yes. The system will
reboot.
7
When you reboot, Windows will be installed from the recovery disc.
8
Insert the second recovery disc when prompted, then follow the onscreen
prompts to complete the restore.
prompts to complete the restore.
9
Remove the recovery disc from the optical drive once the restore is
complete. Do this before rebooting your computer.
complete. Do this before rebooting your computer.