SkyGolf sg1 User Guide

SkyGolf

Maintenance and Care

replacing the Battery

If you have any questions about replacing the SkyCaddie’s battery, please email

our Customer Support Department at customerservice@skygolf.com.

WArnInG! Use only batteries supplied by SkyGolf

to operate your

SkyCaddie; use of non-authorized batteries can void your product

warranty. Your SkyCaddie may not operate properly or can be severely

damaged by using non-authorized batteries.

To Remove the Battery:

. Using a small Phillips screwdriver, remove the three recessed screws on the

back.

. Gently open the rubber plug on the right side of the unit.
3. Place the SkyCaddie in the palm of your hand with the screen facing down and

the antenna away from you. With your free hand slowly pull down on the front

half of the SkyCaddie.

4. Place the bottom half (the side with the battery) on a flat surface battery up,

belt clip button down.

5. If there is a plastic bar over the battery, gently press up on the right-side of the

bar to release it. Otherwise, continue to step 6.

6. Unplug the battery and remove.

WArnInG! Do not touch any exposed electronic components or at-

tempt to further disassemble the unit. Doing so may severely damage

your SkyCaddie.