Revel b12 User Guide

Step 1. Insert the two M3 x 4 machine screws through

the wall bracket and into the rear of the transmitter
module, as shown.

Step 2. Attach the transmitter module with wall bracket

to the wall, using suitable hardware (and wall
anchors, if necessary).

A valid serial number is required for warranty coverage.
This Revel warranty protects the original retail purchaser
for a period of five (5) years (parts and labor) from any
failure as a result of original manufacturing defects,
so long as:

1. The Revel products were purchased within the 

50 United States, its territories, or Canada.

2. The dealer from whom the Revel products were

purchased was authorized to sell such products 
at the time of the original purchase.

3. The original, dated Bill of Sale is presented whenever

service is required during the warranty period.

The balance of this warranty is transferable only if the
used product is purchased from an authorized Revel
dealer. This warranty is only valid for service within the
United States, its territories, and Canada; please contact
an authorized Revel dealer for warranty and service
information.

Any Revel product not performing satisfactorily may 
be returned to the factory for evaluation. Return
authorization must first be obtained by either calling or
writing Customer Service prior to shipping the product.
The customer is responsible for shipping charges to 
the factory. Customer Service will pay return shipping
charges within the United States only in the event that

the product is found to be defective, as mentioned
above. There are other stipulations that may apply 
to shipping charges.

There is no other express warranty on this product.
Neither this warranty nor any other warranty, express or
implied, including implied warranties of merchantability
and fitness, shall extend beyond the warranty period.
No responsibility is assumed for any incidental or
consequential damages, so that the above exclusion 
or limitation may not apply.

This warranty provides specific legal rights. Other states
may provide additional rights. This warranty is applicable
in the United States, its territories, and Canada. Outside 
of the United States, its territories, and Canada, please
contact an authorized Revel dealer for warranty and
service information.The information this document
contains is subject to change without notice. In the event
that there are differences between this warranty and the
provisions of any advertisements, documentation, product
brochures or packaging cartons, the terms of this
warranty will prevail.

For customer service and product shipment information,
refer to www.revelspeakers.com.

The B120 cabinet’s finish does not require routine
maintenance. However, cabinet surfaces that have 
been marked with fingerprints, dust or other dirt can 
be cleaned using a soft cloth. Do not use any cleaning
products or polishes on the cabinet or grille.

To prevent cabinet damage, DO NOT use a cloth made
with steel wool or use metal polish to clean the cabinet.

HSGP1031RC_B120_OM.qxd  6/4/08  10:30 AM  Page 14