Revel sub15 User Guide
CABINET CARE
The ULTIMA SUB-15 subwoofer cabinet has a paint finish and
does not require any routine maintenance. Use a soft cloth, damp-
ened with water only, to remove any fingerprints or to wipe off dust.
Clean the grille by gentle vacuuming, or use a lint remover or two-
sided tape. For wood side panels, occasionally use a household furni-
ture polish to maintain the beauty of the hardwood veneers. For alu-
minum side panels, use a soft cloth, dampened with soapy water
only, and wipe them in the same direction as the grain.
does not require any routine maintenance. Use a soft cloth, damp-
ened with water only, to remove any fingerprints or to wipe off dust.
Clean the grille by gentle vacuuming, or use a lint remover or two-
sided tape. For wood side panels, occasionally use a household furni-
ture polish to maintain the beauty of the hardwood veneers. For alu-
minum side panels, use a soft cloth, dampened with soapy water
only, and wipe them in the same direction as the grain.
AMPLIFIER CARE
The ULTIMA LE-1 does not require any routine maintenance. If
desired, use a soft cloth to remove any fingerprints or to wipe off dust.
desired, use a soft cloth to remove any fingerprints or to wipe off dust.
Do not use any liquids to clean the ULTIMA LE-1’s finish.
TROUBLESHOOTING
If the ULTIMA SUB-15/LE-1 sounds distorted, stops playing, or
otherwise seems to be malfunctioning, first determine whether the
problem is in the subwoofer, the wiring, and/or other audio compo-
nents. If the problem also affects the main speakers, the cause is most
likely in your electronics. If it is only noticed in the subwoofer, make
sure that all connecting cables are correct and in proper working
condition. Make sure the subwoofer is plugged in and turned on.
otherwise seems to be malfunctioning, first determine whether the
problem is in the subwoofer, the wiring, and/or other audio compo-
nents. If the problem also affects the main speakers, the cause is most
likely in your electronics. If it is only noticed in the subwoofer, make
sure that all connecting cables are correct and in proper working
condition. Make sure the subwoofer is plugged in and turned on.
If the front panel LED display shows an error code, use the chart
(on the next page) to determine the probable cause and solution.
(on the next page) to determine the probable cause and solution.
NOTE: An error code will be briefly displayed each time the unit is
turned on or off, by any means. This is normal and is not a fault.
turned on or off, by any means. This is normal and is not a fault.
If the ULTIMA LE-1 does not respond to commands from the
ULTIMA LE-1 Remote Control, try replacing the two AAA batteries
(located in compartment on backside) with new ones.
ULTIMA LE-1 Remote Control, try replacing the two AAA batteries
(located in compartment on backside) with new ones.
If everything seems to be in good working order and the subwoofer
still malfunctions, contact your Revel dealer for assistance (see
Obtaining Service on page 35).
still malfunctions, contact your Revel dealer for assistance (see
Obtaining Service on page 35).
Do not attempt to repair the ULTIMA SUB-15/LE-1 yourself.
...continued on next page
ULTIMA SUB-15/LE-1
Owner’s Manual
33
WARNING
IMPORTANT