Revel sub30 User Guide
Figure 5. How to connect
the REVEL ULTIMA
SUB 30 to a home
theater multi-channel controller
using the controller’s crossover.
the REVEL ULTIMA
SUB 30 to a home
theater multi-channel controller
using the controller’s crossover.
APPLICATIONS (Continued)
MULTI-CHANNEL CONTROLLER WITH CROSSOVER
AND A REVEL ULTIMA SUB 30
AND A REVEL ULTIMA SUB 30
In this application, the REVEL ULTIMA SUB 30’s internal filter
is bypassed and the multi-channel controller’s crossover is used
instead, as shown in Figure 5.
is bypassed and the multi-channel controller’s crossover is used
instead, as shown in Figure 5.
REVEL ULTIMA SUB 30
Owner’s Manual
14
ULTIMA SUB 30 Rear Panel
(split view)
*To SUB/LFE Output
(if using optional Y-adapter)
(if using optional Y-adapter)
Use L or R Input and Increase
Low Pass Level to +6 dB;
Multi-Channel Controller (Decoder)
(rear)
Left Output
FRONT/MAIN
Right Output
Left Output
REAR
Right Output
Left Output
SURROUND/SIDE
Right Output
CENTER Output
SUB/LFE Output
NOTE: Set Controller to
SUB “On” and all speakers
to cross over (typically)
at 80 Hz.
SUB “On” and all speakers
to cross over (typically)
at 80 Hz.
Main Amplifier
(rear)
To Main Speakers
Left Input
Left
Right
Right Input
or
or
or
or
or