Plus bf-030pc Software Guide
6
1 INTRODUCTION
Welcome to PLUS BOARDWARE !
The SOFTWARE SETUP MANUAL (hereafter referred to as the manual) describes how to
connect the PLUS Copyboard BF-030PC or BF-060, and how to set up and start the
software. Please use it to ensure correct and efficient use of the software.
connect the PLUS Copyboard BF-030PC or BF-060, and how to set up and start the
software. Please use it to ensure correct and efficient use of the software.
For instructions on how to use the Copyboard, please refer to the Copyboard BF-030PC or
BF-060 OPERATION MANUAL.
BF-060 OPERATION MANUAL.
1.1 Environment
•
Appropriate PC type
We over recommend IBM PC/AT personal computers and
completely compatible computers with at least an i486/66
MHz CPU and standard COM port (16550 or later UART
chip recommended).
completely compatible computers with at least an i486/66
MHz CPU and standard COM port (16550 or later UART
chip recommended).
•
OS
Microsoft Windows 95(hereafter referred to as Windows
•
Memory
Over 16MB (Recommended OS memory)
•
Hard disk space
Blank area of over 5MB required
1.2 Notes
•
Software Backup
Before installing the software or opening an original file by some method, it is advisable to
make a copy of the software for backup purposes.
make a copy of the software for backup purposes.
•
Latest Information
The latest information concerning the program and manual and trouble-shooting procedures
are found in the README.TXT enclosed with the disks. Please read it before commencing
operation.
are found in the README.TXT enclosed with the disks. Please read it before commencing
operation.