Panasonic dmc-fz28 User Manual
VQT1S36
26
Preparation
•
If there are any white saturated areas, we recommend
compensating the exposure towards negative
compensating the exposure towards negative
(P53)
referring to the histogram
(P45)
and then taking the
picture again. It may result in a better quality picture.
•
There may be white saturated areas if the distance
between the camera and the subject is too close when
taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area
directly illuminated by the photo flash will become white saturated and appear blinking in black
and white.
between the camera and the subject is too close when
taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area
directly illuminated by the photo flash will become white saturated and appear blinking in black
and white.
•
Refer to
P59
for details.
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
Press any button to turn on the LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or playback zoom.
•
AV and HD output is turned off while LCD monitor is turned off.
[HIGHLIGHT]
When the auto review or the review function is activated, white
saturated areas blink in black and white.
saturated areas blink in black and white.
[OFF]/[ON]
[MF ASSIST]
In manual focus, the assistance screen appears on the center of
the screen to facilitate focusing on the subject.
the screen to facilitate focusing on the subject.
[OFF]:
[MF1]:
The center of the screen is enlarged.
The center of the screen is enlarged.
[MF2]:
The center of the screen is enlarged over the whole screen.
The center of the screen is enlarged over the whole screen.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p
[POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
[ON]
[OFF]
DMC-FZ28P_PC.book 26 ページ 2008年7月2日 水曜日 午後11時14分