Wasp WLR8900 User Manual
4
Your Wasp WLR 8900/8905 Scanners are ready for use. The default settings of
the scanners have been pre-programmed for the most common bar code
configurations. Use the “WLR 8900/8905 Setup & Configuration” sections only to
customize the scanners settings. Please review the “Enable Bar Code
Symbologies” configuration beginning on page 14 to see the list of bar codes
symbologies which are enabled by default.
the scanners have been pre-programmed for the most common bar code
configurations. Use the “WLR 8900/8905 Setup & Configuration” sections only to
customize the scanners settings. Please review the “Enable Bar Code
Symbologies” configuration beginning on page 14 to see the list of bar codes
symbologies which are enabled by default.
Tip:
• Use the pre-printed “Bar Code Test Symbols” in Appendix A on pages
28-30 as a test chart to practice scanning.
Chapter 4
Quick Start
KEYBOARD
Y-CABLE
Y-CABLE
BACK OF PC
KEYBOARD MOUSE
DO
NOT
PLUG
IN MOUSE PORT!
KEYBOARD
WLR 8900
PS2 Scanner
PS2 Scanner
WLR 8905
USB Scanner
USB Scanner
U
KEYBOARD
Y-CABLE
Y-CABLE
BACK OF PC
KEYBOARD MOUSE
DO
NOT
PLUG
IN MOUSE PORT!
KEYBOARD
WLR 8900
PS2 Scanner
PS2 Scanner
WLR 8905
USB Scanner
USB Scanner
USB Connector
USB Connection
PS2 Connection