Wren Associates ip-eg12 Installation Instruction
IP MiniGlobe, Wall Mount
Instructions
PROPERTY OF WREN
Page 1 of 4
7L237 REV-C 9/21/2007
124 WREN PARKWAY • JEFFERSON CITY, MO 65109 • TOLL FREE (800) 881-2249 • FAX (877) 893-2317
www.wrensolutions.com
DESCRIPTION
The Wall-Mounted IP MiniGlobe (MGW-IP) is an integrated solution
including a high-quality camera, lens and housing. Like all Wren products,
it is designed for quick and simple installation and servicing.
SUGGESTED INSTALLATION EQUIPMENT
• #1 Phillips-head screwdriver, for dome and housing screws
• #2 Phillips-head screwdriver with a long (at least 6”) shaft, or
other appropriate tools for installing mounting hardware.
• Pliers
COMPONENT LIST [Figure 1]
1. Upper Housing
2. #4-40 screws (3)
3. Main Bracket Assy
4. Dome
4. Dome
5. Camera Assy
6. #8 Pan-Head Sheet-Metal Screws (2) (not shown)
7. DC Power Pigtail (not shown)
8. Butt Connectors (2) (not shown)
8. Butt Connectors (2) (not shown)
WARNINGS AND SAFEGUARDS
Prior to installation and use of this product, please observe the following
warnings:
warnings:
1. Installation and servicing should be done by qualified personnel, and
all work done should conform to local codes.
2. Using replacement parts or accessories other than Wren may
invalidate the warranty.
3. This unit is designed to operate on either IEEE 802.3af POE or
12VDC power. Do not bring any other voltages into the housing.
4. Make sure that the installation method is capable of supporting
three (3) times the weight of the MGW-IP housing and enclosed
contents.
MINIGLOBE CAMERAS:
???
High-Resolution Color Board
Camera
INDOOR IP HOUSINGS:
MGW-IP
IP MiniGlobe, Wall Mounted
Figure 1