HannsG hb175apb User Manual
User’s Manual
FRONT PANEL CONTROL
•
Power
Button:
Press this button to switch ON/OFF monitor’s power.
•
Power Indicator:
Green
— Power On mode.
Orange — Power Saving mode.
•
MENU / RETURN:
1. Turn the OSD menu on/off or return to the previous menu.
2. Exit OSD menu when in volume OSD status.
2. Exit OSD menu when in volume OSD status.
•
Adjust < / >:
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
•
AUTO Button: (for D-sub only)
1. Operates「Enter」function when the OSD menu is on.
2. When OSD menu is off, press and hold this button for more than two seconds to activate the
Auto Adjustment function. (The Auto Adjustment function is used to optimize the H-Position,
V-Position, Clock and Phase.)
V-Position, Clock and Phase.)
NOTES:
•
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
•
Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
13