Pentax S40 Operating Guide

6

By connecting the camera to a printer that supports PictBridge using the 
USB cable (I-USB7) supplied with the camera, you can print images 
directly from the camera without using a PC. Select the images you want 
to print and the number of copies on the camera after it has been 
connected to the printer.

Select [PictBridge] for [USB Connection] on the 
[B Set-up] menu.

1

“Changing the USB Connection Mode” (p.116)

The PictBridge menu appears.

• You are recommended to use the AC adapter D-AC5 (optional) while 

the camera is connected to the printer. The printer may not work 
properly or the image data may be damaged if the batteries run out of 
power while the camera is connected to the printer.

• The focus status lamp and flash status lamp blink slowly while data is 

being transferred from the camera to the printer.

• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the 

camera (such as image quality and DPOF settings) may be valid.

• Pictures may not be printed correctly when the camera is connected 

directly to a PictBridge-compatible printer if the number of copies 
exceeds 500.

Do not connect the camera to your PC while [PictBridge] is selected for 
the USB connection mode.

e_kb348.book  Page 97  Tuesday, February 24, 2004  2:43 PM