Freestyle fs84851 User Manual

  where it left off.

5. To reset to zero, press S1 button to stop

  counting, then press S2 button to reset

  the counter to zero.

NOTE: You can leave the stopwatch running

while switching over to other operating

modes.

1. Rotate S3 button to select TIMER mode.

2. Press S2 button to alter the timer setting

  among 1, 3, 5, 10, 15, 20, 25, 30, 45 and 60

  minutes.

In TIMER mode,

1. Press S1 button to start counting.

2. To stop counting, press S1 button once.

  Press S1 button again to resume from

  where it left off.

3. To reload the TIMER, press S1 button to

  stop counting and then press S2 button.

4. After reaching zero in a countdown, a

  tune will be emitted. To stop the tune,

  press any button, the TIMER will reload

  automatically.

NOTE: You can leave the timer running while

switching over to other operating modes.

Press S4 button to turn on the backlight for

around 3 seconds.

To reduce carbon foot print, these

Freestyle instructions are printed with

soy inks on recycled paper.

S1. Start/stop Button

S2. Lap/reset Button

S3. Jog wheel/Mode Button

S4. Light Button

This Freestyle product features unique

Hydro Pushers®: these pushers can be

pressed under water to a dynamic water

pressure (not water depth) of 3 ATM.

The watch has four display modes:

HOME TIME (TIME) / FOREIGN TIME (TM-2),

HOME TIME ALARM (ALM1) / FOREIGN

TIME ALARM (ALM2), STOPWATCH (STW)

and COUNTDOWN TIMER (TMR).

To change from one display mode to

another, rotate the jog wheel or S3 button

once. The mode description will appear

for 2 seconds before the selected mode is

activated.

Note: The jog wheel can be rotated clock-

wise or counterclockwise, but the mode

sequence will only follow order listed in

above DISPLAY MODES paragraph.

To display FOREIGN TIME, press S2 button

when HOME TIME is displayed. The mode

description (TM-2) will appear shortly before

FOREIGN TIME is displayed. To change back

to HOME TIME, press S2 button.

To display FOREIGN TIME ALARM, press

S2 button when HOME TIME ALARM is

displayed. The mode description (ALM 2)

will appear shortly before the FOREIGN

TIME ALARM is displayed. To change back to

HOME TIME ALARM, press S2 button.

1. Rotate S3 button to select time mode.

2. Press S2 button to toggle between HOME

  TIME and FOREIGN TIME mode to set.

3. Press and hold S2 button for 2 seconds

  until the “SET” message appears and the

  second digits will blink.

4. Press S1 button to reset the second digits

  to 00.

5. Rotate S3 button, the minute digits will

  blink.

6. Press S1 button to set the minute digits.

  Holding down the button speed up the

  process.

7. Rotate S3 button, the hour digits will

  blink.

8. Press S1 button to set the hour digits.

9. Follow the same pattern to set date,

  month, day (of the week), hour format

  and calendar format.

10.To set the hour format, press S1 button

  to toggle between 12-hour and 24-hour

  format. The P.M. indicator may be

  displayed to indicate the time period

  12:00 P.M. – 11:59 P.M. in 12-hour

  format.

11.To set the calendar format, press S1

  button to toggle between M-D (month-

  date) and D-M (date-month) format.

12.When finished making all the settings,

  press S2 button to confirm.

NOTE: The chosen hour and calendar

formats will apply to both HOME TIME mode

and FOREIGN TIME mode.

NOTE: In FOREIGN TIME settings, only

minutes, hours, date, month and day are

open to setting.

1. Rotate S3 button to select time mode.

2. Press S1 button to toggle between time

  display and calendar display.

Note: Calendar will be displayed for around

6 seconds before the watch switches back

to time display.

1. Rotate S3 button to select alarm mode.

2. Press S2 button to toggle between HOME

  TIME ALARM and FOREIGN TIME ALARM

  mode to set.

3. Press and hold S2 button for 2 seconds

  until the “SET” message appears and the

  minute digits will blink.

4. Press S1 button to set the minute digits.

  Holding down the button will speed up

  the process.

5. Rotate S3 button, the hour digits will

  blink.

6. Press S1 button to set the hour digits.

7. When finished making all the settings,

  press S2 button to confirm.

In alarm mode,

1. Press S2 button to toggle between HOME

  TIME ALARM and FOREIGN TIME ALARM

  mode to set.

2. Press S1 button once to activate the

  alarm. Alarm indicator

will

  appear.

3. Press again to activate the hourly chime.

  Chime indicator   will appear.

4. Press the third time to activate both

  functions. Both of the indicators will

  appear.

5. Press the fourth time to deactivate both

  functions. Both of the indicators will

  disappear.

A tune will go off by the hour if the hourly

chime function is activated.

An alarm tune will be emitted for around 20

seconds at the designated time when the

alarm is activated. To stop the tune, press

any button.

1. Rotate S3 button to select STOPWATCH

  mode.

2. The stopwatch will then be displayed in

  its current state – reset, running, or

  stopped.

3. To resume a counting, press S1 button to

  resume from where it left off.

4. To start a new counting, reset the stop

  watch to zero first.

  Press S1 button to stop counting, then

  press S2 button to reset counter to zero.

For the measurement of elapsed time:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. To stop counting, press S1 button once.

  Press S1 button again to resume from

  where it left off.

3. To reset to zero, press S1 button to stop

  counting, then press S2 button to reset

  the counter to zero.

For the measurement of split time:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. While the stopwatch is running, press S2

  button once to register a lap. The stop

  watch is still running in the background.

  To display the currently accumulated

  time, press S2 button again.

3. Repeat the last step until all the laps have

  been registered.

4. To stop counting, press S1 button once.

  Press S1 button again to resume from

FS1074-SPEED

DIAL-A

G6873-R01

S4

S1

S2

S3